Dry the drum

Diameter × length: φ2628×8650 mm
Transmission mode: 4 drive wheels friction transmission
Number of gear units: 4 units
Motor power: 18.5 kW
Production capacity: 260 t/h
Insulation device: 50mm thick aluminum silicate insulation cotton felt, outsourced stainless steel plate
Temperature measurement method: thermocouple measurement
Measurement error: <±5°C

 

 

Drying drum (raw material)
　　It is mainly composed of drying cylinder, front and rear smoke box, bracket wheel, roller, base frame, burner and so on. The drying drum is driven by four plug-in shaft reducers to drive the tray and drive the drying cylinder to run through friction. The cylinder is made of wear-resistant material 16Mn steel plate. The outer body of the 50mm thick aluminum silicate insulation material insulation, outsourcing stainless steel plate, so that the heat is not lost. The design of the guide plate is made of 16Mn steel plate, which is wear-resistant and reasonably arranged. Make full use of the heat source of the burner, high thermal efficiency, fast heating speed, energy saving. The drying cylinder outlet has a temperature measuring device, the measured temperature is interlocked with the set value, and the flame size is automatically adjusted.